Multiple Account Mode
Xerox WorkCentre 5016/5020 User Guide 77
Reviewing the Total Number of Copies
The following procedure describes how to review the total number of copies made by
each account.
1.
Log in to the machine.
For information on how to log in to the machine, refer to "Logging in to the Machine" (P.69) under "Multiple
Account Mode" (P.69).
2.
Hold down the <Stop> button, and
while holding down the <Stop> button,
press <3> button.
• If you have logged in under the System
Administrator’s account
An account number, copy job limit set
for the account, and the current number
of copies made under the account
appear sequentially in the Display
starting from the account number 1 to
10.
• If you have logged in under any account other than the System Administrator’s
An account number that has been used to log in, the copy job limit set for the
account, and the current number of copies made under the account, appear
sequentially in the Display.
If the displayed value has more than three digits
The following describes how a numerical value, which has more than three digits,
appears in the Display.
1.
First two digits of the value appears in
the Display.
2.
Press the <Start> button to display the
rest.
The second half of the numerical value
appears in the Display.
The value shown in this example is
“21100”.
<Stop> button<3> button
<Start> button
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
