System Settings
Xerox WorkCentre 5016/5020 User Guide 126
12 Transition Time to Sleep Mode Select the transition time for the
machine to switch to the Sleep
Mode after the machine switches
to the Low Power Mode.
For more information on the Sleep
Mode, refer to "Sleep Mode" (P.32).
Note • When selecting [0], the
machine switches to the
Sleep Mode as soon as
the machine switches to
the Low Power Mode
during inactivity.
0: 0 minute
1: 5 minutes
2: 20 minutes*
3: 60 minutes
4: 120 minutes
5: 240 minutes
254: Disable
13 Background Suppression
(Copying)
The machine automatically
removes the background color of
an original document for a copy
job.
Select the Background
Suppression level.
0: Disable
1: Level 1
2: Level 2*
3: Level 3
4: Level 4
5: Level 5
14 Background Suppression
(Scanning)
The machine automatically
removes the background color of
an original document for a scan
job.
Select the Background
Suppression level.
Note • You can also select
whether or not to enable
this feature in the scan
driver.
1: Level 1
2: Level 2*
3: Level 3
4: Level 4
5: Level 5
15 Metric/Inch Select the default measurement
unit.
Note • The default value
depends on the location
that you purchased the
machine.
• Depending on the
measuring unit the
machine is in, the
document sizes that can
be detected by the
Document Feeder
change. Refer to
"Document Sizes
Detectable by the
Document Feeder"
(P.130).
0: Metric
1: Inch13
2: Inch14
16 <Scan Completed> Auto Clear
Time
When the indicator next to the
<Scan Completed> button is
blinking during a copy job, and if
the <Scan Completed> button is
not pressed for a specified period
of time to indicate the last page of
documents, the machine
automatically resumes to process
the copy job.
0: Disable
1: 20 seconds
2: 30 seconds
3: 60 seconds*
4: 90 seconds
Menu
Number
Menu Description Value
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
