Xerox WorkCentre 5016 User Manual

Multiple Account Mode
Xerox WorkCentre 5016/5020 User Guide 70
3. Enter a three-digit password which
corresponds to the account number
that you just entered using the numeric
keypad.
For security reasons, as you enter each
digit of the password, a hyphen appears
in the Display instead of the actual
number that you enter.
4. Press the <Start> button to confirm the
entered password.
If the entered password is correct, the
machine enters the Copy Mode, and [1]
appears in the Display.
The indicator next to the <Log In/Out>
button is lit while you are logged in to
the machine.
Note • You do not need to log in to the
machine for a scan job or print job.
If you wish to run a scan job after
logging in, simply press the
<Scan> button to switch the
machine to the Scan Mode.
<C> button
Numeric keys
<Start> button
<Log In/Out>
button
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 5016 Specifications

General

Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Manual
Functions	Copy, Print, Scan
Print Technology	Laser
Print Speed	16 ppm
Copy Speed	16 cpm
Scan Type	Flatbed
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	10, 000 pages
Operating System Compatibility	Windows, Mac, Linux