Xerox WorkCentre 5335 Administrator's Guide

Scanning
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
107
Updating the List of Templates at the Control Panel
If you are storing templates on your network in a template pool repository, when you make any
changes to the templates in the repository, you can update the list of templates that displays at the
control panel.
1. Press the Services Home button on the control panel, then touch the Network Scanning icon.
2. Touch Update Templates.
Configuring a Validation Server
Scan metadata entered at the printer control panel can be verified against a list of valid values by a
validation server.
1. In CentreWare IS, click Properties > Services > Network Scanning > Validation Servers.
2. Click Add.
3. Next to Host Name / IP Address & Port, type the appropriately formatted address and port
number of the server. The default port number is 443 for HTTPS.
4. Next to Path, type the path on the server.
Note: The format for a directory path for FTP is /directory/directory, while the format for a
directory path for SMB is \directory\directory.
5. Type a Response Timeout between 5 and 100 seconds.
6. Click Apply.

Xerox WorkCentre 5335 Specifications

General

Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Automatic
Memory (Standard)	1 GB
Scan Destinations	Email, Network Folder, USB
Fax Speed	33.6 Kbps
Monthly Duty Cycle	100, 000 pages
Hard Drive	80 GB
Connectivity	USB, Ethernet