Printing
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
80
UNIX, Linux, and AS/400 Printing
UNIX-based printing uses LPD/LPR port 515 or port 9100 to provide printer spooling and network print
server functionality. Xerox printers can communicate using either protocol.
Xerox Services for UNIX Systems (XSUS)
XSUS is an application that allows you to manage and print to multiple printers in UNIX and Linux
environments. With XSUS you can:
• Configure and check the status of network connected printers.
• Set up a printer on your network as well as monitor the operation of the printer once installed.
• Perform maintenance checks and view supplies status at any time.
• Provide a common look-and-feel across the many different suppliers of UNIX and Linux
operating systems.
Supported Printing Models
• Workstation-to-printer (Peer-to-Peer): Print jobs are processed and spooled locally on your
computer, then sent directly to the printer. XSUS must be installed on each computer.
• Workstation-to-Server (Client-Server): Print jobs are processed and spooled on your computer
and then sent to the printer to be printed. This model requires XSUS to be installed on both the
server and on the computer.
• Server Based: Print jobs are sent unprocessed from your computer and are spooled on the server
and then sent to the printer. This model requires XSUS to be installed on the server only. Individual
computers can print to the printer by setting up a generic lp or lpr queue pointing to the queue on
the print server.
• Network Information Service (NIS) Based: NIS uses a printer configuration map on the server.
When new printer queues are added to a print server, only the configuration file in the master NIS
server must be updated. NIS clients can then print to any of the queues listed on the server map
without setting up local queues.
Note: Consult your UNIX or Linux operating system manual for more information on how to set up
NIS-based printing.
To Next Page
Loading...
Need help?
General
