Xerox WorkCentre 5335 Administrator's Guide

Network Configuration
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
44
WSD
Web Services for Devices (WSD) is technology from Microsoft that provides a standard method for
discovering and using network connected devices. It is supported in Windows operating systems since
Windows Vista and Windows Server 2008. WSD is one of several supported communication protocols.
Before you begin, ensure that the printer and client computers are on the same IP subnet.
Enabling WSD
1. In CentreWare IS, click Properties > Connectivity > Port Settings.
2. Next to WSD Print select Enabled to enable the WSD print service.
3. Next to WSD Scan select Enabled to enable the WSD scan service.
4. Click Apply.
Configuring WSD
1. In CentreWare IS, click Properties > Connectivity > Protocols > WSD.
2. Edit the following settings if required:
• Port Number. Default is 80.
• Data Receive Time-Out in seconds. Default is 30
• Notification Delivery Time-Out in seconds. Default is 8.
• Maximum TTL. Default is 1.
• Maximum Number of Subscribers. Default is 50.
3. Click Apply.

Xerox WorkCentre 5335 Specifications

General

Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Automatic
Memory (Standard)	1 GB
Scan Destinations	Email, Network Folder, USB
Fax Speed	33.6 Kbps
Monthly Duty Cycle	100, 000 pages
Hard Drive	80 GB
Connectivity	USB, Ethernet