Network Configuration
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
40
Bindery Settings
NetWare can use Bindery services for authentication. Bindery services are a stand-alone database
system containing user information and security data.
If you are using NetWare in Bindery mode, under Bindery Settings, type the name of your primary File
Servers for the printer in the File Server field.
Note: When the printer uses Bindery mode, the NDS Tree and NDS Context fields are blank.
NetWare Directory Services (NDS)
NDS is a hierarchical, object-oriented database that represents all of the assets of an organization in a
logical tree structure. Assets can include printers, servers, computers, people, organizations, and more.
1. Under NetWare Directory Services (NDS), type the appropriately formatted NDS Tree and
NDS Context.
2. Type a name for the NDS tree in the NDS Tree field. The default entry for this field is
Xerox_DS_Tree. If you are using Bindery mode, leave this field blank.
3. Type a context in the NDS Context field. The default entry for this field is Xerox_DS_Context. If
you are using Bindery mode, leave this field blank.
Service Location Protocol (SLP)
SLP is a service discovery protocol that allows computers and other devices to find services in a local
area network without prior configuration.
1. Under SLP, next to Active Discovery, select Enabled.
2. Next to Use SLP for Name Resolution, select Enabled
3. Type the scope name in the Scope field.
4. Type the SLP server address in the SLP Server field.
5. Click Apply.
To Next Page
Loading...
Need help?
General
