Xerox WorkCentre 5335 User Manual

Printing
WorkCentre 5300 Series Multifunction Printer
User Guide
59
1. Remove the screw that holds the spacer plate at the back of the tray.
2. Lit the spacer plate to remove it.
3. Place the tabs at the bottom of the plate into the slots in the bottom of the drawer that
correspond with the paper size.
4. Slide the top of the spacer plate to engage the peg on the back of the tray into the matching hole
in the plate.
5. Install the screw to secure the spacer plate.
6. Repeat steps 1-5 for the spacer plate at the front of Tray 6.
7. Locate the pin at the top of the side gate.
8. Lift the pin and guide it to the desired paper size in the slot on the top of the side gate.
9. Release the pin to lock it into place.
wc53xx-112
wc53xx-113

Xerox WorkCentre 5335 Specifications

General

Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Automatic
Memory (Standard)	1 GB
Scan Destinations	Email, Network Folder, USB
Fax Speed	33.6 Kbps
Monthly Duty Cycle	100, 000 pages
Hard Drive	80 GB
Connectivity	USB, Ethernet