Xerox WorkCentre 5335 User Manual

Printing
WorkCentre 5300 Series Multifunction Printer
User Guide
73
Printing Booklets
With 2-sided printing, you can print a document in the form of a small booklet. Create booklets for any
paper size that is supported for 2-sided printing. The driver automatically reduces each page image
and prints four page images per sheet of paper (two on each side). The pages are printed in the correct
order so that you can fold and staple the pages to create the booklet.
Note: Booklets can be created using A4/210 mm x 297 mm (8.5 x 11 in.) paper, and
A3/297 mm x 420 mm (11 x 17 in.) paper.
When you print booklets using the Windows PostScript or Macintosh driver, you can specify the gutter
and creep.
• Gutter: Specifies the horizontal distance (in points) between the page images. A point
is 0.35 mm (1/72 in.).
• Creep: Specifies how much the page images are shifted outward (in 10ths of a point). This
compensates for the thickness of the folded paper, which otherwise would cause the page images
to shift slightly outward when folded. You can select a value from zero to 1 point.
Gutter Creep

Xerox WorkCentre 5335 Specifications

General

Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Automatic
Memory (Standard)	1 GB
Scan Destinations	Email, Network Folder, USB
Fax Speed	33.6 Kbps
Monthly Duty Cycle	100, 000 pages
Hard Drive	80 GB
Connectivity	USB, Ethernet