Printing
WorkCentre 5300 Series Multifunction Printer
User Guide
64
Printing on Special Media
This section includes:
• Printing on Envelopes on page 64
• Printing on Labels on page 65
• Creating and Saving Custom Sizes on page 84
Printing on Envelopes
Envelopes can be printed from Tray 5 (Bypass Tray) or from the optional envelope tray in the
Tray 1 position.
Guidelines
• Successful envelope printing is dependent on the quality and construction of the envelopes. Try
another envelope brand if the desired results are not achieved.
• Maintain constant temperatures and relative humidity.
• Store unused envelopes in their original packaging to avoid the excess moisture or dryness which
can affect print quality and cause wrinkling. Excessive moisture can cause the envelopes to seal
before or during printing.
• Do not use padded envelopes.
To print envelopes:
1. Load envelopes in the desired tray.
2. In the print driver, do one of the following:
• Select Envelope as the paper type.
• Select Tray 5 (Bypass Tray) as the paper source.
• With the optional Envelope Tray in the Tray 1 position, select Tray 1 as the paper source.
Note: Some wrinkling or embossing may occur when printing on envelopes.
CAUTION: Never use envelopes with windows or metal clasps: they can damage the printer.
Damage caused by using unsupported envelopes is not covered under the Xerox
®
warranty,
service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available
in the United States and Canada. Coverage may vary outside these areas. Please contact your
local representative for details.
To Next Page
Loading...
Need help?
General
