Xerox WorkCentre 5335 User Manual

Printing
WorkCentre 5300 Series Multifunction Printer
User Guide
63
2. If required, move the paper tray guides further out to load the new envelopes. To adjust the side
and front guides, pinch the guide lever on each guide and slide the guides to their new position. To
secure the guides in position, release the levers.
3. Load the envelopes in the envelope tray flap side down. Flaps should be closed and on the leading
edge, toward the left side of the tray.
Notes:
• Printing will appear on the side facing up.
• Do not load envelopes above the maximum fill line. Doing so may cause jams.
4. Adjust the guides in the envelope tray so they touch the edges of the stack.
5. Push the tray completely into the printer.
6. If you have changed the envelope size: on the printer touch screen, touch Change Settings,
choose the envelope size on the touch screen, touch Save, then touch Confirm.
7. If you are loading more envelopes of the same size, touch Confirm on the touch screen.
wc53xx-033
wc53xx-032
wc53xx-035

Xerox WorkCentre 5335 Specifications

General

Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Print Speed (Black)	35 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Automatic
Memory (Standard)	1 GB
Scan Destinations	Email, Network Folder, USB
Fax Speed	33.6 Kbps
Monthly Duty Cycle	100, 000 pages
Hard Drive	80 GB
Connectivity	USB, Ethernet