Maintenance
WorkCentre 7800 Series Multifunction Printer 187
User Guide
5. Remove the new transfer belt cleaner from the packaging. Retain the packaging.
6. Place the used transfer belt cleaner in the plastic bag.
7. Remove the protective cover from the new transfer belt cleaner.
CAUTION: Do not touch the surface of the transfer belt cleaner. Doing so could deteriorate image
quality.
8. Support the new transfer belt cleaner with your left hand and slide it straight into the opening until
it stops.
9. Push the orange knob in, then turn it clockwise until snug.
To Next Page
Loading...
Need help?
General
