Xerox WorkCentre 7800 series User Manual

Maintenance
WorkCentre 7800 Series Multifunction Printer 191
User Guide
Replacing Staple Cartridges
This section includes:
• Replacing Staples in the Integrated Finisher ......................................................................................................... 191
• Replacing Staples in the Main Stapler of the Office Finisher LX ................................................................... 193
• Replacing Staples in the Booklet Maker of the Office Finisher LX ................................................................ 195
• Replacing Staples in the Main Stapler of the Professional Finisher ............................................................. 196
• Replacing Staples in the Booklet Maker of the Professional Finisher .......................................................... 198
A message appears on the control panel when a staple cartridge is empty.
Replacing Staples in the Integrated Finisher
WARNING: Do not perform this procedure while the printer is copying or printing.
1. Open the finisher door as shown.
2. Grip the staple cartridge by the orange handle and pull it firmly toward you to remove it.
3. Remove any loose staples or other debris from inside the finisher.
4. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).

Xerox WorkCentre 7800 series Specifications

General

Brand	Xerox
Model	WorkCentre 7800 series
Category	All in One Printer
Language	English