Xerox WorkCentre 7800 series User Manual

Troubleshooting
246 WorkCentre 7800 Series Multifunction Printer
User Guide
5. Remove the jammed staples (1), then push the clamp in the direction shown until it snaps into the
locked position (2).
WARNING: The points of the jammed staples are sharp. Remove the jammed staples carefully.
6. To insert the staple cartridge into the integrated finisher, grip the cartridge by the orange handle
and insert it into the stapler until it clicks.
7. Close the finisher front cover.

Xerox WorkCentre 7800 series Specifications

General

Brand	Xerox
Model	WorkCentre 7800 series
Category	All in One Printer
Language	English