9
Installation
7. Open the document cover and remove the
packing material.
13. Lift and pull open the paper tray. Turn
and remove the pressure plate lock.
CAUTION: Paper will misfeed if the pressure
plate lock is not removed.
For the XC1250 and XC1255 copiers only
Note: Be sure to remove the pressure plate
lock from both paper trays.
9. Press the release lever to open the copier.
14. Store the pressure plate lock in the
location shown.
Note: Save the pressure plate lock. It will
be needed if the copier has to be shipped for
servicing or moved.
11. Load copy paper into the tray.
• Refer to the Loading Copy Paper
section for additional information.
• Do not fill above the max line.
12. Push the paper tray firmly back into the
copier.
(continued)
To Next Page
Loading...
Need help?
General