Xilinx KCU105 User Manual

KCU105 Board User Guide www.xilinx.com 113
UG917 (v1.4) September 25, 2015
Appendix C: System Controller
Common Header
Board Area Info
MultiRecord Area
- OEM FMC Record
- DC Load Records (three groups)
- DC Output Records (three groups)
If the FMC IIC EEPROM has not been programmed,
ReadBuffer[000] - ReadBuffer[255] displays buffer contents = 0xFF and
the Common Header reports "Invalid Format Version FF"
At the end of the displayed data, the system controller again displays the FMC Menu.
Option 3: Read FMC LPC IIC EEPROM
This option displays the FMC I2C EEPROM data, if programmed, in a similar fashion as
option 1.
Options 4-7: Set FMC VADJ Voltage
Each of the following options sets the VADJ_1V8 rail to the voltage indicated. The result of
choosing an option here may be viewed by returning to the Main Menu, choosing the
SYSMON Menu, and selecting option 5: Continuous Scan SYSMON Measurements.
• Option 4: Set FMC VADJ to 1.8V
• Option 5: Set FMC VADJ to 1.5V
• Option 6: Set FMC VADJ to 1.2V
• Option 7: Set FMC VADJ to 0.0V
The result of choosing an option here can be viewed by returning to the Main Menu,
choosing the SYSMON Menu, and selecting option 5: Continuous Scan SYSMON
Measurements (the results after choosing option 5.Set FMC VADJ to 1.5V are shown here:
Press Any Key to Return to SYSMON Menu
Temperature = 33.29 C Min = 28.15 C Max = 33.96 C
--------------------------------------------------------
MIN MAX
Power Voltage Current Current Current
VCCINT: 0.35 W 0.95 V 0.37 A 0.17 A 0.42 A
VCCAUX: 0.42 W 1.80 V 0.23 A 0.22 A 0.24 A
VCCBRAM: 0.05 W 0.95 V 0.05 A 0.03 A 0.05 A
VCC1V8: 0.02 W 1.80 V 0.01 A 0.01 A 0.01 A
VADJ_1V8: 0.06 W 1.50 V 0.04 A 0.01 A 0.06 A
VCC1V2: 0.06 W 1.20 V 0.05 A 0.05 A 0.06 A
MGTAVCC: 0.07 W 1.00 V 0.07 A 0.07 A 0.09 A
MGTAVTT: 0.03 W 1.20 V 0.02 A 0.02 A 0.03 A
Send Feedback

Xilinx KCU105 Specifications

General

Brand	Xilinx
Model	KCU105
Category	Motherboard
Language	English