Xilinx KCU105 User Manual

KCU105 Board User Guide www.xilinx.com 69
UG917 (v1.4) September 25, 2015
Chapter 1: KCU105 Evaluation Board Features
FMC HPC Connector J22
[Figure 1-2, callout 33]
The 400-pin HPC connector defined by the FMC specification (Figure B-2) provides
connectivity for up to:
• 160 single-ended or 80 differential user-defined signals
•10 GTH transceivers
•2 GTH clocks
• 4 differential clocks
• 159 ground and 15 power connections
The HPC connector at J22 implements a subset of the full FMC HPC connectivity:
• 58 differential user-defined pairs (34 LA pairs: LA[00:33]; 24 HA pairs: HA[00:23])
•8 GTH transceivers
•2 GTH clocks
• 2 differential clocks
• 159 ground and 15 power connections
The FMC DP[7:0] transmit and receive signal data paths are routed with a differential
characteristic impedance of 100Ω (±10%) with an insertion loss of <4 dB up to 8 GHz. The
KCU105 board FMC VADJ voltage VADJ_1V8 for the J22 and J2 FMC connectors is sourced
by the MAX15301 U30 voltage regulator described in KCU105 Board Power System.
Send Feedback

Xilinx KCU105 Specifications

General

Brand	Xilinx
Model	KCU105
Category	Motherboard
Language	English