Xinje DS5E Series Manual

P0-07 First inertia ratio
Gain
performance
parameters
Yes
P1-00 First speed loop gain
P1-01
Integral time constant of the first speed
loop
P1-02 First position loop gain
P2-00.0 Disturbance observer switch
P2-01.0 Adaptive mode switch
P2-35 Torque command filter time constant 1
P2-41 Disturbance observer gain
P2-47.0 model loop switch
P2-49 model loop gain
Gain
performance
parameters
Yes
P2-55 model speed feedforward gain
P2-60.0 Active vibration suppression switch
P2-61 Active vibration suppression frequency
P2-62 Active vibration suppression gain
P2-63 Active vibration suppression damping
P2-69.0 First notch switch
P2-69.1 Second notch switch
P2-71 First notch frequency
P2-72 First notch attenuation
P2-73 First notch band width
P2-74 Second notch frequency
P2-75 Second notch attenuation
P2-76 Second notch band width
P2-17
Inertia identification and internal
instruction auto-tuning max speed
Auto-tuning
setting
parameters
No
P2-86 auto-tuning jog mode
P2-87 auto-tuning min limit position
P2-88 auto-tuning max limit position
P2-89 auto-tuning max speed
P2-90
auto-tuning acceleration/deceleration
time
Note: P2-60~P2-63 are automatically modified in auto-tuning process. Users are not allowed to modify them
58

Xinje DS5E Series Specifications

General

Brand	Xinje
Model	DS5E Series
Category	Servo Drives
Language	English