Wireless Array
110 Viewing Status on the Wireless Array
Undefined VLANs
This status-only window lists VLANs that have not been configured on the Array,
but that are being detected on the Array’s trunk port(s), i.e. wired ports. See
“VLANs” on page 204.
Figure 59. Undefined VLANs
This feature alerts you to the fact that an 802.1Q trunk to the Array has VLANs
that are not being properly handled on the Array. To reduce unnecessary traffic,
only VLANs that are actually needed on the Array should normally be on the
trunk, e.g., the management VLAN and SSID VLANs. In some cases such as
multicast forwarding for Apple Bonjour you may want to extend other VLANs to
the Array, in order to forward Bonjour or other multicast packets (see “Advanced
Traffic Optimization” on page 300).
See Also
VLANs
To Next Page
Loading...
Need help?
General
