Wireless Array
56 Installing the Wireless Array
Network Management Planning
Network management can be performed using any of the following methods:
Centralized Web-based management, using the optional Xirrus
Management System (XMS). XMS Cloud provides zero-touch
provisioning and ongoing management. XMS is run on a dedicated
Xirrus appliance or your own server. XMS manages large Wireless Array
deployments from a centralized Web-based interface and offers the
following features:
Globally manage large numbers of Arrays
Seamless view of the entire wireless network
Easily configure large numbers of Arrays
Rogue AP monitoring
Easily manage system-wide firmware updates
Monitor performance and trends
Aggregation of alerts and alarms
Command Line Interface, using an SSH (Secure Shell) utility, like PuTTY.
The utility must be set up to use SSH-2, since the Array will only allow
SSH-2 connections.
Web-based management, using the Array’s embedded Web Management
Interface (WMI). This method provides configuration and basic
monitoring tools, and is good for small deployments (one or two units).
See Also
Failover Planning
Power Planning
Security Planning
To Next Page
Loading...
Need help?
General
