Wireless Array
Introduction 13
Enterprise Class Management
The Wireless Array can be used with its default settings, or using zero touch
cloud-based automated provisioning . Settings may also be customized using the
Array’s embedded Web Management Interface (WMI). The WMI enables easy
configuration and control from a graphical console, plus a full complement of
troubleshooting tools and statistics.
Figure 5. WMI: Array Status
In addition, a fully featured Command Line Interface (CLI) offers IT professionals
a familiar management and control environment. SNMP (Simple Network
Management Protocol) is also supported to allow management from an SNMP
compliant management tool, such as the optional Xirrus Management System.
To Next Page
Loading...
