22
90
90
F
NF
G.ID
G.SET
GND
LV L
OPTION
MENU SOL
46
GRAB
G.B.
90
T.ID G.ID
90
GND STABILIZER
TRACKING
GROUND
Ground
FAST
OPTION MENU
G.B
Level of the mineralization. The higher it is the more the
ground is mineralized. Pump the coil on the ground several
times to assess it with more precision.
Your actual current ground effect setting.
Ground mineralization index (measured constantly as a
guide).
Intermediate zone Ferrous Non ferrous...
GROUND ZONE
90 80 70 60 0
Ferrite
Bricks,
Ceramic, etc.
Soil mineralization can affect the detector efciency. It can be of natural magnetic origin like iron oxides
and ferrite, often linked to old human settlements.
On the coast, depending on the regions, mineralization can go from magnetic grade (black sands) to elec-
trically conductive grade (salt water).
Illustration of the soil zone in the inland programs :
Press
G.B
Adjustable from 60 to 90 on inland programs and from 0 to 90 on the 3 Beach programs.
3 ground setting modes are available: GRAB, MANUAL or TRACKING. GRAB is advised, as it is quick and
accurate. (MANUAL mode only available on the DEUS MONO program).
When entering the Ground page, moves into an all metal mode, unlike I. This is practical
for listening to the ground and its response during the adjustment, but also gives you a quick insight to
the ground at any time, for example a clean zone or identifying a mix of ferrous and non-ferrous targets.
Grab Mode
From any menu, you can calibrate the ground effect at any time by
holding the key down while you pump the coil on the soil until
the ground audio signal is attenuated and the value is stabilized.
Caution, a short press will take you into the Pinpoint page.
± 15 cm
90
9046
GND STABILIZER
GRAB
G.B.
To Next Page
Loading...
Need help?
General
