32
Choose the coil to delete then
EDIT
. Delete all digits with then add 6 zeros "000000". Press
VALID
and conrm with
YES
.
OPTION/PAIRING coil/wireless headphones/pinpointer
Delete a coil from the list
G.ID
G.ID
T.ID
T.ID
SETTINGS
AUDIO
START
PAIRING
UNPAIR
SELECT
SELECT
OPTION
HEADPHONE
90
90
Pairing XP wireless headphones
Delete XP wireless headphones
Start XP wireless headphones
Press
OPTION
>
PAIRING
, with
-
or
+
choose the headphone, then
SELECT
>
UNPAIR
>
SELECT
>
YES
.
Press
OPTION
then
PAIRING
with . Choose Pinpointer logo with
+
then
SELECT
.
Switch on the MI-6 whilst holding its button down for eight seconds. You will see the
serial number of your pinpointer displayed on the remote control. Then switch on
the MI-6 so that it works with and its wireless headphones.
When pairing, the MI-6 automatically switches to program 7. This program will only
work with the detector and headphones. In this program the MI-6 will not generate
any sound or vibration through it’s own speaker (MI-6 manual).
OPTION
>
PAIRING
, Pinpointer logo choose
UNPAIR
, then
SELECT
and nally
YES
.
To use the MI-6 without the , select programs 1 to 6 on the MI-6 menu. To
change program : Switch MI-6 on - press the button for 5 seconds, an audio chime
indicates that you have entered the program selection mode. Press to correspond
with the desired program number (e.g. press twice for program 2). After 2 seconds
the audio chime indicates the MI-6 has returned to search mode.
G.ID
T.ID
SETTINGS
AUDIO
PAIRING
SELECT
OPTION
90
RESEARCH
UNPAIR
SELECT
OPTION
T.ID G.ID
90
Pairing the MI-6 Pinpointer
Delete the MI-6 from the remote control
It is impossible to pair a second set of headphones if there is one already paired. In this case, simply
delete the original set of headphones from the remote control beforehand.
AUTOMATIC: If no wireless headphones are paired, choose the wireless head-
phone logo when starting the remote control. The remote control will invite you to
pair it by pressing the
key on the headphone module for two seconds.
MANUAL: Press
OPTION
>
PAIRING
, with
-
or
+
. Choose the headphone then
press
SELECT
and switch on the headphones by holding the key down for 8 s.
G.ID
T.ID
UNPAIR
AUTO.
START
HEADPHONE
58 90
Auto : XP wireless headphone paired to the remote control switch ON / OFF au-
tomatically.
Manu: XP wireless headphone paired to the remote control switch ON / OFF ma-
nually with
and
.
To Next Page
Loading...
Need help?
General
