26
Audio Out
Equalizer
OPTION/AUDIO
From the home page adjust the Volume, Audio Output and Equalizer by pressing
-
or
+
for 2 sec.
To alter the wireless headphone volume from the remote control or hear the beep from the remote control
keys in the headphones, it is essential that a search coil is paired.
Press
OPTION
>
AUDIO
.
Select the Audio output and your desired volume with .
SPEAKER - WIRELESS HEADPHONES - BH01 - WIRED HEADPHONES
Alter the volume with
-
and
+
.
The wireless headphone volume is controlled by the remote control or the + and -
keys on the headphones.
Note that you can use the following audio outputs at the same time :
• wireless headset + speaker
• wireless headset + wired headset
• wireless headset + BH-01 headset
Over and above a simple low/high audio setting, the equalizer can correct the
acoustics of headphones over four bands to match them to your hearing preferenc-
es. You can thus set the low tones to around 150 Hz, the medium low to around 450
Hz, the medium high to around 2000 Hz and the high to around 4000 Hz.
Press
OPTION
>
AUDIO
>
EQUALIZER
>
SELECT
Choose the audio frequency range that you wish to alter with , increase or
decrease the level.
ON/OFF: You can compare your settings quickly by switching OFF the Equalizer.
Equalizer is adjustable on :
One of the many innovations of
incorporates the very latest in audio processing. You can now
alter the volume, set an equalizer to adjust the audio quality in your ear and your headphones, you can
also choose the type of sound you would like for your detecting sessions from a sound library.
AUDIO
SELECT
OPTION
90
SETTINGS
PROGRAM
T.ID G.ID
AUDIO OUT
OPTION
90
EQUALIZER
AUDIO TYPE
T.ID G.ID
2
0 dB
150 450 2K 4K
90
T.ID G.ID
OFF
The remote control battery life is 30 h on the wireless headphones output, but drops to 15 h with the
loud speaker or active BH-01 headphones, even at level 1. Disable the unused outputs by moving them
to 0 to increase battery life.
WS6
WSA II
WSA II XL
BH-01 FX-03
To Next Page
Loading...
Need help?
General
