Comfort Driving
108
Click on the CID "Click on the CID " →→Vehicle SettingsVehicle Settings" to enable " to enable
or disable the N gear mis-operation protection.or disable the N gear mis-operation protection.
D: Drive gearD: Drive gear
When the vehicle is stationary, step on the brake When the vehicle is stationary, step on the brake
pedal and push the shift lever up to the second pedal and push the shift lever up to the second
gear at the same time. The D gear indicator light gear at the same time. The D gear indicator light
on the instrument cluster will be highlighted, and on the instrument cluster will be highlighted, and
the vehicle enters D gear at this time.the vehicle enters D gear at this time.
P: Park gearP: Park gear
When the vehicle is stationary, step on the brake When the vehicle is stationary, step on the brake
pedal while pressing the Gear 'P' button on the pedal while pressing the Gear 'P' button on the
end of the shift lever. Then the indicator of gear end of the shift lever. Then the indicator of gear
"P" on the instrument cluster will come on and "P" on the instrument cluster will come on and
the gear will be shifted to P.the gear will be shifted to P.
─
When the charging gun is connected to
the vehicle for charging, the gear will be
automatically shifted to P.
─
With the gear in D or R and vehicle speed
< 3 km/h, when the driver neither fastens
the seat belt nor steps on the brake pedal
and accelerator pedal, the gear will be
automatically shifted to P after the driver's
door is opened.
Caution
●
Certain conditions need to be satisfied to
shift gears. If you shift the gear with the
conditions unsatisfied, the dashboard will
show "gun connected, unable to shift
gears", "Please apply the brake before
shifting gears", or "Please slow down first
and then shift gears". Operate according
to the prompts to satisfy the gearshift
conditions.
●
If you are unable to shift gears normally,
contact XPENG Service Center for
maintenance.
To Next Page
Loading...
Need help?
General
