Active Safety
210
Rear Cross Trac Alert (RCTA)Rear Cross Trac Alert (RCTA)
Function IntroductionFunction Introduction
RCTA can alert the driver of vehicles coming from RCTA can alert the driver of vehicles coming from
the rear cross blind spot when the reversing view the rear cross blind spot when the reversing view
is limited.is limited.
Warning
●
It's impossible for the smart technology
of RCTA to exceed the physical limit,
which can only work within the limit of
the system. Do not take risks due to the
advanced system. The system is not a
substitute for driver's attention.
●
RCTA is a driver-assist feature and does
not work in all situations.
●
The use of RCTA in no way means that the
driver can do nothing and be relaxed. It is
always the driver's responsibility to reverse
in a safe manner.
●
Do not use the system when the vision is
restricted and it is dicult to see trac
conditions (e.g. on roads with heavy trac
or crossing multiple trac lanes).
●
The system may not be able to accurately
identify cyclists and pedestrians, so
you must always pay attention to the
surroundings.
Function ActivatedFunction Activated
When the vehicle is in R/N gear, the speed When the vehicle is in R/N gear, the speed
of the vehicle is 2~15 km/h, and there are of the vehicle is 2~15 km/h, and there are
vehicles, pedestrians, and two-wheeled vehicles vehicles, pedestrians, and two-wheeled vehicles
approaching at a certain speed within the approaching at a certain speed within the
detection range, and there is a risk of collision, detection range, and there is a risk of collision,
To Next Page
Loading...
Need help?
General
