Safe Driving
155
4
5
6
7
8
9
10
11
will be automatically disabled.will be automatically disabled.
●
Click on the CID " →Vehicle Settings" to
enable or disable the automatic parking
function.
●
AUTO HOLD can only be activated if the
driver's door is closed, the seat belt is
fastened, and the gear is in D or R.
●
After keeping the automatic parking state
for a period of time, the automatic parking
function will switch to the electronic parking
brake EPB.
Note
When the automatic parking function is
activated, opening the driver's door or
unfastening the seat belt will automatically
switch to the electronic parking brake EPB.
Warning
AUTO HOLD cannot exceed the laws of
kinematics, please turn on AUTO HOLD
according to the road conditions.
Electronic Stability Program (ESP)Electronic Stability Program (ESP)
Electronic Stability Program (ESP) Electronic Stability Program (ESP)
DescriptionDescription
For the electronic stability program, the sensors For the electronic stability program, the sensors
identify the vehicle's driving condition (e.g. in the identify the vehicle's driving condition (e.g. in the
event of understeer, oversteer or driving wheel event of understeer, oversteer or driving wheel
slipping), allow targeted braking intervention or slipping), allow targeted braking intervention or
driving torque limitation and effectively reduce driving torque limitation and effectively reduce
the risk of sideslip or drift to ensure the vehicle's the risk of sideslip or drift to ensure the vehicle's
driving stability.driving stability.
Turning On/Off with CIDTurning On/Off with CID
To Next Page
Loading...
Need help?
General
