Safe Driving
154
Note
●
When the EPB is enabled or disabled,
it is normal for the system to make an
operation noise.
●
When the parking brake is enabled, if
the vehicle cannot be powered on and
the parking brake cannot be disabled
due to a undervoltage 12 V battery, it
can be disabled by a jumper hitch or by
contacting the XPENG Service Center.
●
Under special circumstances, long
press the P button to activate the EPB
emergency braking function. During
emergency braking, the EPB indicator will
flash.
Caution
●
If the parking brake cannot be enabled
or disabled manually, contact the XPENG
Service Center for troubleshooting as
soon as possible.
●
Do not drive the vehicle without disabling
the parking brake, otherwise it can easily
damage the electronic parking brake
system.
Automatic Parking (AUTO HOLD)Automatic Parking (AUTO HOLD)
Apply AUTO HOLDApply AUTO HOLD
When you need to stop briefly, press the brake When you need to stop briefly, press the brake
pedal hard after the vehicle stops, and the pedal hard after the vehicle stops, and the
IC indicator light IC indicator light is on, which means the is on, which means the
automatic parking function has been activated. automatic parking function has been activated.
At this time, you can release the brake pedal, At this time, you can release the brake pedal,
the system will automatically enable the brake to the system will automatically enable the brake to
keep the vehicle stationary. When you apply the keep the vehicle stationary. When you apply the
accelerator pedal and start driving, the system accelerator pedal and start driving, the system
To Next Page
Loading...
