Active Safety
208
If the driver fails to brake in time or the braking If the driver fails to brake in time or the braking
force is too small, the RCP will be activated to force is too small, the RCP will be activated to
reduce or avoid injuries in a vehicle collision.reduce or avoid injuries in a vehicle collision.
Caution
If the RAEB stops the vehicle, the vehicle will
remain stationary for a while and the driver
should take over braking as soon as possible.
Function OperationsFunction Operations
Tap on the CID "Tap on the CID " →XPILOT", you can turn on/off →XPILOT", you can turn on/off
the reverse collision prevention.the reverse collision prevention.
Restrictions and ErrorsRestrictions and Errors
RCP does not always work in all situations, and RCP does not always work in all situations, and
unnecessary, untimely or ineffective warnings unnecessary, untimely or ineffective warnings
or missed warnings can occur for a variety of or missed warnings can occur for a variety of
reasons, such as:reasons, such as:
●
Radars are restricted. Refer to Page 8.
●
The presence of bulky, moving metal objects
at the blind spot.
●
The object to be detected is moving too fast.
The above examples, warnings, and restrictions The above examples, warnings, and restrictions
do not cover all the conditions that may affect do not cover all the conditions that may affect
the proper operation of RCW.the proper operation of RCW.
Rearward Collision Warning (RCW)Rearward Collision Warning (RCW)
Function IntroductionFunction Introduction
The RCW function detects the collision risk The RCW function detects the collision risk
behind the vehicle while driving and gives a behind the vehicle while driving and gives a
warning.warning.
To Next Page
Loading...
Need help?
General
