Safe Driving
133
4
5
6
7
8
9
10
11
Warning
●
One seat belt is for one person only. It is
prohibited to use one seat belt together
with child by holding him/her on lap.
●
In case of any sign of wear, cracking or
other damages to the seat belt, please
contact XPENG Service Center for
replacement.
●
Avoid exposing the seat belts to any
chemicals, liquids, etc. If any seat belt fails
to retract or be removed from the buckle,
please contact XPENG Service Center for
troubleshooting as soon as possible.
●
Do not add any non-ocial accessory
to the seat belt, including but not limited
to the following products: additional
latches, strap restrictors, buckle extension
connectors, etc., as they may reduce
or even disable the seat belt's normal
protection.
Warning
●
Any seat belt shall be fully retracted
without dangling if unused. If any seat
belt cannot be retracted completely,
please contact XPENG Service Center
immediately for troubleshooting.
●
Do not remove, install, modify or
disassemble the seat belts, seat belt
retractors, or seat belt anchors by yourself.
Seat Belts with Collision WarningSeat Belts with Collision Warning
Motorized seat belt descriptionMotorized seat belt description
Seat belts have the following functions:Seat belts have the following functions:
1. 1. Gap elimination: When the vehicle is ready Gap elimination: When the vehicle is ready
and the driver has fastened the seat belt, and the driver has fastened the seat belt,
or when the driver returns to normal sitting or when the driver returns to normal sitting
position after leaning forward too much, the position after leaning forward too much, the
seat belt will automatically retract, eliminating seat belt will automatically retract, eliminating
the gap between the driver and seat belt the gap between the driver and seat belt
strap for better restraint protection.strap for better restraint protection.
To Next Page
Loading...
Need help?
General
