Safe Driving
134
2. 2. Auto retraction: When the driver unlocks the Auto retraction: When the driver unlocks the
seat belt buckle, the seat belt will retract seat belt buckle, the seat belt will retract
smoothly until it is fully retrieved.smoothly until it is fully retrieved.
3. 3. Secondary Collision pre-warning: When the Secondary Collision pre-warning: When the
seat belt receives an FCM warning signal seat belt receives an FCM warning signal
during driving, the seat belt will vibrate to during driving, the seat belt will vibrate to
alert the driver.alert the driver.
4. 4. Third Collision pre-tensioning: When the seat Third Collision pre-tensioning: When the seat
belt receives an FCW collision pre-tensioning belt receives an FCW collision pre-tensioning
signal during driving, the seat belt will retract signal during driving, the seat belt will retract
automatically, restraining the driver in the automatically, restraining the driver in the
backrest and reducing the risk of injury or backrest and reducing the risk of injury or
death.death.
Note
In order to ensure that the electric seat belt
works reliably, there is a limit to the number of
times each function of the electric seat belt
can be used. When the number of triggering
times reaches the upper limit of its life, the
corresponding function will no longer be
triggered, other functions will not be affected.
Please contact XPENG Service Center for
replacement in time.
Warning
●
Do not modify or repair the seat belt
by yourself, please have it inspected or
repaired in XPENG Service Center.
●
In a collision or similar situation, the seat
belts shall be promptly replaced after
being subjected to a strong impact.
Replacement is also a must if a seat belt
has any sign of wear or damage.
To Next Page
