XPENG P7 2023 - Anti-Lock Braking System (ABS)

Safe Driving
156
 Through "Through " →Vehicle Settings→Vehicle Settings" on the CID " on the CID
to turn on/off ESP on the interface.to turn on/off ESP on the interface.
Warning
─
ESP can not prevent the accidents caused
by dangerous driving or high-speed
emergency steering.
─
If the ESP fails, contact XPENG Service
Center for troubleshooting as soon as
possible.
Note
●
When the vehicle is powered on, the ESP
function is turned on by default.
●
When ESP is turned off, if the vehicle
speed exceeds 80 km/h, the ESP function
will be turned on automatically.
Note
●
The ESP will limit the power output
when the vehicle is slipping (starting or
accelerating rapidly on the snow and ice-
covered road or muddy road, etc.), so
the ESP should be temporarily turned off
when the vehicle gets stuck in the mud.
After the vehicle gets out of the mud, turn
it on again.
Anti-Lock Braking System (ABS)Anti-Lock Braking System (ABS)
Anti-lock Brake System DescriptionAnti-lock Brake System Description
ABS prevents wheels from locking when you ABS prevents wheels from locking when you
apply the maximum braking force. It improves apply the maximum braking force. It improves
the steering control performance of the vehicle the steering control performance of the vehicle
in case of emergency braking under most road in case of emergency braking under most road
conditions.conditions.
In case of emergency braking, ABS continuously In case of emergency braking, ABS continuously
monitors the speed of each wheel and adjusts monitors the speed of each wheel and adjusts
the brake pressure according to the lock the brake pressure according to the lock
condition.condition.