Instructions for XPENG Owners
12
Warning
●
It is forbidden to replace, refit, or add
cameras without authorization, and only
the original or approved cameras of
XPENG can be used. Otherwise, related
functions may not be used normally, and
XPENG does not assume any responsibility
for any direct or indirect damages caused
thereby. When the camera fails or needs
to be installed, please contact the XPENG
Service Center.
●
The cameras do not work properly in all
driving situations or in trac, weather
and road conditions, so you should drive
carefully and always be responsible for
driving safely when your vehicle is in a
complex environment or in poor condition.
Restrictions and ErrorsRestrictions and Errors
When a camera is not working properly, functions When a camera is not working properly, functions
based on the camera's detection information may based on the camera's detection information may
work improperly. Meanwhile, cameras have limited work improperly. Meanwhile, cameras have limited
detection ranges and cannot detect targets detection ranges and cannot detect targets
beyond the ranges.beyond the ranges.
The camera performance may be affected by the The camera performance may be affected by the
poor environment condition, while obscuring may poor environment condition, while obscuring may
disable the camera.disable the camera.
The following conditions may cause cameras' The following conditions may cause cameras'
detection failure, delay or error:detection failure, delay or error:
●
Poor lighting conditions or poor visibility (due
to heavy rain, snow, dense fog, etc.).
●
The camera is facing the direction of a
light source, or the illumination intensity
is insucient.
●
Dramatic changes in light (e.g. entering and
leaving a tunnel).
https://www.automotive-manuals.net
To Next Page
Loading...
Need help?
General
