Active Safety
198
If the driver fails to brake in time or the braking If the driver fails to brake in time or the braking
force is too small, AEB will be activated to reduce force is too small, AEB will be activated to reduce
or avoid injuries in a vehicle collision.or avoid injuries in a vehicle collision.
Caution
If the AEB stops the vehicle, the vehicle will
remain stationary for a while and the driver
should take over braking as soon as possible.
Instrument Cluster Indicator Instrument Cluster Indicator
The function status of the FCW can be understood The function status of the FCW can be understood
through the indicator on the ICM:through the indicator on the ICM:
FCW function is turned off FCW function is turned off
FCW malfunctions FCW malfunctions
Caution
If the FCW function fails, contact XPENG Service
Center for troubleshooting as soon as possible.
Function OperationsFunction Operations
FCW is enabled by default, tap on the CID "FCW is enabled by default, tap on the CID "
→XPILOT", you can turn off or turn on the FCW →XPILOT", you can turn off or turn on the FCW
function.function.
To Next Page
Loading...
Need help?
General
