Instructions for XPENG Owners
19
1
2
3
4
5
6
7
8
9
10
11
►
Do not press the unlock switch of the
charging gun while plugging it. Please
plug the charging gun vertically until you
hear a "click", indicating that the charging
gun is plugged in place.
3. 3. Observe the charging indicators.Observe the charging indicators.
4. 4. After charging, tap "STOP CHARGING" on the After charging, tap "STOP CHARGING" on the
CID energy center interface, press and hold CID energy center interface, press and hold
the unlock button on the charging gun, and the unlock button on the charging gun, and
unplug the charging gun.unplug the charging gun.
Caution
If the charging gun cannot be pulled out after
unlocking, please push the charging gun firmly
in place again, press the "Unlock" button on the
key again, and then pull out the charging gun
again. Do not unplug it forcibly.
Warning
●
AC charging must be carried out in
compliance with the relevant regulations
of the charging station.
●
Please check if the charging pile complies
with the related standards before charging.
https://www.automotive-manuals.net
To Next Page
Loading...
Need help?
General
