Active Safety
219
1
2
3
4
5
6
7
8
9
10
11
Instrument Cluster IndicatorInstrument Cluster Indicator
You may learn about the function status of IHB You may learn about the function status of IHB
through the indicator light of the ICM:through the indicator light of the ICM:
The IHB function is ready, but not activated. The IHB function is ready, but not activated.
The IHB function is activated and the low The IHB function is activated and the low
beams of the vehicle are on.beams of the vehicle are on.
The IHB function is activated and the high The IHB function is activated and the high
beams of the vehicle are on.beams of the vehicle are on.
Functional Fault Functional Fault
Caution
If the IHB fails, contact XPENG Service Center
for troubleshooting as soon as possible.
Function OperationsFunction Operations
Tap on the status bar Tap on the status bar at the top of the CID to at the top of the CID to
turn on/off the intelligent high beam function.turn on/off the intelligent high beam function.
Restrictions and ErrorsRestrictions and Errors
●
The IHB function is subject to camera and
various restriction conditions.
●
IHB performance will be degraded if the
camera is not properly calibrated.
●
Due to failure of the camera, vision is
restricted due to dust cover, icing, rain,
snow and fog and other factors, and the IHB
performance will be degraded;
●
There are highly reflective objects within the
sensing range of the camera on the road.
●
IHB is unavailable in dazzling scenarios, such
as heavy rain or fog.
To Next Page
Loading...
Need help?
General
