Active Safety
221
1
2
3
4
5
6
7
8
9
10
11
DSM detects the driver's facial state. When the DSM detects the driver's facial state. When the
driver is fatigued or distracted, the function will driver is fatigued or distracted, the function will
alert the driver through the ICM and prompt alert the driver through the ICM and prompt
sound.sound.
Function OperationsFunction Operations
Tap on the CID "Tap on the CID " →Vehicle Settings" to turn on/→Vehicle Settings" to turn on/
off the in-vehicle camera.off the in-vehicle camera.
Caution
It shall not be possible for the driver to manually
deactivate the DSM system. It may however be
possible for the driver to manually deactivate
the system HMI warnings. Following manual
deactivation of the System HMI warnings,, which
will affect safe driving. Please think twice before
turning it off.
Restrictions and ErrorsRestrictions and Errors
Driver fatigue detection function does not always Driver fatigue detection function does not always
work in all situations. Various reasons may cause work in all situations. Various reasons may cause
the failure of the function, such as:the failure of the function, such as:
●
High/low voltage power supply;
●
The driver fatigue detection camera
malfunctions or the camera is blocked.
The above examples, warnings, and restrictions The above examples, warnings, and restrictions
do not cover all the situations that affect the do not cover all the situations that affect the
proper operation of driver fatigue detection.proper operation of driver fatigue detection.
To Next Page
Loading...
Need help?
General
