Maintenance
242
3. 3. Hand washingHand washing
─
Add quality neutral vehicle cleaners to
cold or lukewarm water, dampen a soft
cloth and hand washes the exterior of the
body.
4. 4. Rinse with waterRinse with water
─
After washing, rinse with water to prevent
any residual soap from drying out on the
surface.
5. 5. Dry with a soft clothDry with a soft cloth
Notes for Exterior CleaningNotes for Exterior Cleaning
Caution
●
Do not use hot water or detergents.
●
Do not rinse under a hot sun.
●
If a high-pressure cleaner is used, the
nozzle must be at least 30 cm away from
the surface of the body and do not keep
spraying water at a certain spot all the time.
Do not spray water toward the charging port.
Caution
●
When washing the vehicle in a low-
temperature environment or parking the
vehicle outdoors on snowy days, the
Active Grille Shutter (AGS) blades may
be frozen and cannot work properly, with
the AGS fault warning on the instrument
cluster. This is normal and will not affect
normal vehicle use. After driving for
a period of time (about one hour) or
thawing the blades with a heat gun, the
fault will disappear automatically. If the
fault persists after the blades are thawed,
please contact XPENG Service Center for
troubleshooting.
●
Do not spray water from the hose directly
toward the windows, door seals, or through
the wheel hub holes into the brake parts.
To Next Page
Loading...
Need help?
General
