Maintenance
244
Seal MaintenanceSeal Maintenance
─
When maintaining the seals, use a soft cloth
to remove the dust and dirt from the surface.
Periodically coat the rubber seal with a
special protectant.
Wiper Blade CleaningWiper Blade Cleaning
─
Regularly inspect and clean the edges of
the wiper blades for rubber cracks, splits,
and roughness. If damaged, please contact
XPENG Service Center for replacement.
─
Contaminants on the wiper blades may
reduce the effectiveness of the wiper blades.
Contaminants include ice, car wash spray
wax, cleaning fluids containing bacteria and/
or water repellents, bird droppings, tree sap,
and other organic materials.
─
Please clean the wiper blades as follows:
●
Clean the windscreen with a non-
abrasive glass cleaner.
●
Ta p " →Vehicle Settings→Front Wiper
Maintenance Mode" on the CID to turn
on/off the front wiper maintenance mode.
●
Lift the wiper arm slightly from the
windscreen to get close enough to the
wiper blade, then wipe the blade clean
with isopropyl alcohol or wiper cleaning
fluid.
●
If the wiper blades are still ineffective
after cleaning, they may need to be
replaced.
Caution
●
Care should be taken when lowering the
wiper arm to prevent it from momentarily
dropping on and hitting the windshield.
To Next Page
Loading...
Need help?
General
