Maintenance
246
CarpetCarpet
Avoid using carpets that are too wet. For Avoid using carpets that are too wet. For
heavily soiled areas, use a diluted automotive heavily soiled areas, use a diluted automotive
interior cleanser.interior cleanser.
CID and ICCID and IC
─
Clean the CID and IC with a special clean
lint-free soft cloth. Never use cleaning agents
(such as glass cleaner), wet rags, or dry
rags with static electricity (such as a freshly
cleaned ultra-fine microfiber).
─
Ta p " →Display→Screen Cleaning" on the
CID to wipe the CID after enabling cleaning
mode. This way, you will not accidentally
activate the buttons and change the settings.
─
You can also activate the screen cleaning
mode in the shortcut menu of the CID.
Caution
It is forbidden to use corrosive liquids such as
acids and alkalis, deoxidizing cleaning agents,
and sodium hypochlorite (84 disinfectant) to
clean the CID.
Chrome-Plated Surfaces and Metal SurfacesChrome-Plated Surfaces and Metal Surfaces
─
Polishes, abrasive cleaners, or hard cloths
can damage the chrome-plated surface and
the finish of the metal surface.
Foot MatsFoot Mats
─
To extend the life of your vehicle carpet
and for easy cleaning, please use genuine
foot mats approved by XPENG. Clean the
foot mats regularly and make sure they
are properly installed. If the foot mats are
excessively worn, please replace them
promptly.
To Next Page
Loading...
