XPENG P7 2023 - Page 249

Maintenance
248
Check the level markings on the side of the Check the level markings on the side of the
coolant reservoir:coolant reservoir:
►
MAX: Upper limit marker
►
MIN: Lower limit marker
The coolant level should be between the MIN The coolant level should be between the MIN
mark and the MAX mark, if it is below the MIN mark and the MAX mark, if it is below the MIN
mark, add XPENG-approved coolant promptly.mark, add XPENG-approved coolant promptly.
Refill the CoolantRefill the Coolant
1. 1. Use a suitable tool to remove the front Use a suitable tool to remove the front
compartment trim panel to access the compartment trim panel to access the
coolant reservoir.coolant reservoir.
2. 2. Unscrew the reservoir cap and fill it with Unscrew the reservoir cap and fill it with
coolant.coolant.
►
To maximize the performance and life
of the traction battery, motor, and A/C
system, a specific type of coolant should
be chosen accordingly (with different