XPENG P7 2023 User Manual

Maintenance
250
Check the level markings on the side of the brake Check the level markings on the side of the brake
fluid reservoir:fluid reservoir:
►
MAX: Upper limit marker
►
MIN: Lower limit marker
The brake fluid level should be between the MIN The brake fluid level should be between the MIN
mark and the MAX mark. If it is below the MIN mark and the MAX mark. If it is below the MIN
mark, add the brake fluid approved by XPENG mark, add the brake fluid approved by XPENG
promptly.promptly.
●
Add brake fluid to the MAX level (but do not
exceed the MAX line). After adding brake
fluid, install the cap.
●
As brake fluid is toxic, comply with relevant
environmental regulations when releasing or
disposing of used brake fluid.
Refill of Brake FluidRefill of Brake Fluid
1. 1. Wrap a flat screwdriver in a cloth and pry off Wrap a flat screwdriver in a cloth and pry off
the reservoir upper trim panel.the reservoir upper trim panel.
2. 2. Clean the reservoir cap first to prevent dust Clean the reservoir cap first to prevent dust
from entering.from entering.
3. 3. Unscrew and remove the reservoir cap.Unscrew and remove the reservoir cap.
4. 4. Fill with brake fluid approved by XPENG Fill with brake fluid approved by XPENG
Motors until the brake fluid approaches the Motors until the brake fluid approaches the
maximum (MAX) mark.maximum (MAX) mark.

XPENG P7 2023 Specifications

General

Brand	XPENG
Model	P7 2023
Category	Automobile
Language	English