Maintenance
253
3
4
5
6
7
9
10
11
Refill of Windshield Washer FluidRefill of Windshield Washer Fluid
1. 1. Clean the reservoir cap first to prevent dust Clean the reservoir cap first to prevent dust
from entering the reservoir.from entering the reservoir.
2. 2. Open the fluid reservoir.Open the fluid reservoir.
3. 3. Fill with washer fluid until you see the level Fill with washer fluid until you see the level
almost reaches the fill port.almost reaches the fill port.
Warning
●
Do not allow the windscreen washer
fluid to spill onto the body panels. If it
is accidentally splashed, wipe the spill
immediately and clean the spill area with
water.
●
A non-alcohol glass washer fluid
that meets the requirements of local
regulations should be selected, and
washer fluid with a freezing point below
the local minimum temperature should be
selected. The washer fluid that does not
meet the standard may cause damage to
the glass washer fluid pipeline.
●
Never use the windscreen washer fluid
that contains more than 10% ethanol, as
this type of glass washer fluid may cause
lamp cover to crack in hot environments.
To Next Page
Loading...
Need help?
General
