Instructions for XPENG Owners
27
1
2
3
4
5
6
7
8
9
10
11
as this may interfere with the function of your
electronic device and result in personal injury
or death.
●
After charging is completed, please close the
charging port lid in time to avoid rain, snow
or other foreign objects from entering.
AC ChargingAC Charging
Brief DescriptionBrief Description
You can use the discharge device to provide the You can use the discharge device to provide the
power of the traction battery to other electrical power of the traction battery to other electrical
appliances. The discharge voltage is 230 V and appliances. The discharge voltage is 230 V and
the maximum power is 3.3 kw.the maximum power is 3.3 kw.
Power Supply OperationPower Supply Operation
1. 1. Open the charging port.Open the charging port.
2. 2. Plug the power supply gun into the vehicle's Plug the power supply gun into the vehicle's
AC charging port.AC charging port.
3. 3. Ta p "Ta p " Start Power SupplyStart Power Supply".".
4. 4. After the power supply is completed, tap After the power supply is completed, tap
""End Power SupplyEnd Power Supply".".
5. 5. Press and hold the unlock button of the Press and hold the unlock button of the
power supply gun, and unplug the power power supply gun, and unplug the power
supply gun.supply gun.
Note
●
You can set the power supply limit, so that
the power supply will automatically stop
when the traction battery power limit is
reached.
●
When the SOC is lower than 20%,
the external power supply function is
unavailable.
Warning
●
It is strictly forbidden to use AC power
supply function in case of any damage of
the external appliance or the power supply
gun.
To Next Page
Loading...
Need help?
General
