Emergency Aid
283
4
5
7
8
9
10
11
5. 5. Insert the electrical source plug into the on-Insert the electrical source plug into the on-
board cigarette lighter socket and power on board cigarette lighter socket and power on
the vehicle.the vehicle.
6. 6. Turn on the power switch button (black) and Turn on the power switch button (black) and
start injecting sealant into the tire. At this start injecting sealant into the tire. At this
time, the value of the pressure gauge will first time, the value of the pressure gauge will first
rise above 4 bar, and then slowly drop to the rise above 4 bar, and then slowly drop to the
pressure of the leaking tire. When the tire pressure of the leaking tire. When the tire
pressure reaches the recommended value, pressure reaches the recommended value,
turn off the power switch, and then pull out turn off the power switch, and then pull out
the sealant injection tube, inflation tube, and the sealant injection tube, inflation tube, and
the electrical source plug.the electrical source plug.
7. 7. Restart the vehicle and drive the vehicle for Restart the vehicle and drive the vehicle for
3-5 km at a speed below 30 km/h.3-5 km at a speed below 30 km/h.
8. 8. Park the vehicle in a safe place and connect Park the vehicle in a safe place and connect
the inflation tube to the tire again.the inflation tube to the tire again.
9. 9. Observe the tire pressure value, if there is a Observe the tire pressure value, if there is a
significant drop, inflate it. Then drive for significant drop, inflate it. Then drive for
3-5 km and check the tire pressure. If the 3-5 km and check the tire pressure. If the
tire pressure still drops significantly, it means tire pressure still drops significantly, it means
that the tire is seriously damaged, which is that the tire is seriously damaged, which is
beyond the scope of use of this product. beyond the scope of use of this product.
Please understand any inconvenience.Please understand any inconvenience.
10. 10. Remove the "80" sticker attached to the Remove the "80" sticker attached to the
sealant can and stick it on the steering wheel sealant can and stick it on the steering wheel
to remind the driver that the speed of the to remind the driver that the speed of the
vehicle should be kept within vehicle should be kept within
80 km/h after using this product.80 km/h after using this product.
To Next Page
Loading...
Need help?
General
