Preparations Before Driving
71
2
3
4
5
6
7
8
9
10
11
Charging Operation and Status Charging Operation and Status
The wireless charging area is located in the front The wireless charging area is located in the front
glove box. Please place the phone face up along glove box. Please place the phone face up along
the limit position in the sensing area during the limit position in the sensing area during
charging, the icon "charging, the icon " " will be displayed on the " will be displayed on the
CID.CID.
Wireless charging will stop when:Wireless charging will stop when:
1. 1. Charging completed;Charging completed;
2. 2. Errors in the charging process, including Errors in the charging process, including
vehicle supply voltage is too low or too high.vehicle supply voltage is too low or too high.
Caution
●
Only one phone can be charged wirelessly
at a time, with a maximum charging power
of 15W.
●
On bumpy roads, the function may be
intermittently deactivated and then
activated. If the phone charging stops
due to deviation from the induction area,
you need to move the phone back to the
induction area.
●
This function requires a wireless
connection between the vehicle and the
phone. Therefore, charging may fail in case
of either vehicle or phone fault.
To Next Page
Loading...
Need help?
General
