Preparations Before Driving
98
─
Flip the combination switch down to the limit
position and turn on the left turn signal light,
the indicator on the ICM will flash.
─
Flip the combination switch up to the limit
position and turn on the right turn signal light,
the indicator on the ICM will flash.
─
Flip the combination switch to the initial
position or turn the steering wheel back to
turn off the turning signal.
Lane Change FlashingLane Change Flashing
To indicate lane change, quickly flip the To indicate lane change, quickly flip the
combination switch up or down to the resistance combination switch up or down to the resistance
point and release it, the combination switch will point and release it, the combination switch will
immediately return and the corresponding turn immediately return and the corresponding turn
signal light flashes 3 times.signal light flashes 3 times.
Hazard Warning LightHazard Warning Light
Press the hazard warning light switch on the roof Press the hazard warning light switch on the roof
switch panel to turn on the hazard warning light, switch panel to turn on the hazard warning light,
and all turn signal lights flash. Press again to turn and all turn signal lights flash. Press again to turn
it off.it off.