8-82
HOW TO USE YOUR CARAVAN’S EQUIPMENT
FRONT WRAP ROUND SEATING
(Option)
If you have purchased the wrap round
seating option for your new caravan please
note that the centre seat can be extended by
the use of the locking mechanism which can
be found under this seat.
Pull the slats forward then turn the locking
plate to be in the direction down the caravan
(see fig 1) in order to secure the front seat in
place.
This will prevent the slats from going back
into the front seat and increase the seated
area.
Please ensure you return the locking plate to
its normal position (see fig 2) if you wish to
remove the wrap round seating.
Fig 1
Fig 2
A
B
REMOVABLE DRAWERS
To remove from the caravan, first locate and
release the retaining strap on the side of the
unit.
Once the strap has been released the unit
can be slid left as Figure A. The next step is
to slide the unit forward as Figure B, once in
this position the unit should simply lift out
from the locator holes.
In order to return the unit to its original
position, firstly locate the unit into the
locating holes of the base unit. Once located
then reverse the previous process.
To Next Page
Loading...