Xplore iX104C5 User Manual

Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Using the BIOS Setup Utility to set input method defaults
Selecting the digitizer input method
1.
2.
Select the Startup Configuration tab.
Digitizer Selection
field
In the Digitizer Selection field, select the value from the
drop-down list as follows:
iX104C5 User’s Handbook
Value
Auto
Touch Only
Digitizer Only
Description
Enables automatic sensing (Auto Sense) of inputs
from touch and from the active pen.
Note: This is the default setting.
Enables touch input only. Active digitizer, pen
inputs, and Auto Sense are all disabled.
Enables inputs from the active pen only. Touch
input and Auto Sense are disabled.
117

Xplore iX104C5 Specifications

General

Brand	Xplore
Model	iX104C5
Category	Tablet
Language	English