Xplore iX104C5 User Manual

Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Using the BIOS Setup Utility to set input method defaults
Setting digitizer input method security
Follow these steps to specify whether the tablet user can change the
digitizer input method settings:
1.
2.
In the BIOS Setup Utility, select the Password tab.
In the Password Setting field, select a value from the drop-down
list as follows:
Value
No passwords set
Supervisor
password set only
Description
Anyone can change the
digitizer input settings.
A supervisor password
must be entered in order
to change the input
settings.
Notes
This setting is not
controlled by Windows
User groups.
The supervisor
password must be
entered before the BIOS
Setup Utility will open.
User password set The user cannot change Only the supervisor can
the input settings. change the input
settings.
3.
4.
Click OK.
Reboot the computer.
118
iX104C5 User’s Handbook

Xplore iX104C5 Specifications

General

Brand	Xplore
Model	iX104C5
Category	Tablet
Language	English